| Basic functions | Transparently transmits 8xFE or 16xFE services. |
| Port types | - Supports 10BASE-T/100BASE-TX signals. The electrical ports comply with IEEE 802.3u.
- Supports 10BASE-T/100BASE-TX signals when working with an ETF8 board. The electrical ports comply with IEEE 802.3u.
- Supports 100BASE-FX/100BASE-LX signals when working with an EFF8 board. The optical ports comply with IEEE 802.3u.
|
| Functions when being used with an interface board | - Provides 16 electrical ports to receive/transmit Ethernet signals when working with an ETF8 board.
- Provides 8 optical ports and 8 electrical ports to receive/transmit Ethernet signals when working with an EFF8 board.
|
| Port characteristics | Working modes | 100M full-duplex, 10M full-duplex, auto-negotiation |
| Traffic control mode at ports | Auto-negotiation mode | Not supported |
| Non-autonegotiation mode | Supported |
| Query/Setting of port status | Supported |
| Query of port types | Supported |
| Setting of optical power thresholds | Not supported |
| Pluggable optical module | Not supported |
| Service categories | EPL service | Supports PORT-based transparent transmission. |
| Service specifications | Formats of Ethernet data frames | IEEE 802.3 | Supported |
| Ethernet II | Supported |
| IEEE 802.1q TAG | Supported |
| Frame length range | - N1EFT8 boards support the setting of the packet length, which ranges from 1518 bytes to 1535 bytes. Ports 1-4 and 9-12 on the board support a jumbo frame with a maximum length of 6144 bytes, whereas ports 5-8 and 13-16 support a jumbo frame with a maximum length of 9600 bytes.
- N2EFT8 boards support the setting of the packet length, which ranges from 1518 bytes to 9600 bytes.
- N2EFT8 boards support a jumbo frame with a maximum length of 9600 bytes.
|
| Concatenation granularities | Supports VC-12, VC-3, VC-12-Xv (X ≤ 63), and VC-3-Xv (X ≤ 3) granularities. |
| Encapsulation formats | HDLC | Supported |
| LAPS | Supported |
| GFP-F | Supported |
| MPLS technology | Not supported |
| VLAN technology | Supports VLAN transparent transmission. |
| Maximum uplink bandwidth | The maximum uplink bandwidth is 1.25 Gbit/s. An EFT8 board can adapt to the bandwidth of its slot. |
| Maximum bound bandwidth | 24xVC-3, or 126xVC-12 + 18xVC-3 |
| VCTRUNK specifications | Number of supported VCTRUNKs: 16 Configuration principles are as follows: - Each VC channel can be bound only to one VCTRUNK.
- VCTRUNK1 to VCTRUNK8 must be bound when a board is housed in a slot providing 622M bit/s bandwidth.
- A VCTRUNK can be bound with the VC-12 path or VC-3 path at one time. A VCTRUNK should not be bound with VC-12 and VC-3 paths at the same time.
- A VCTRUNK can be bound with a maximum of three VC-3s or a maximum of 63 VC-12s.
- VCTRUNK 1-VCTRUNK 8 can be bound with VC-3s 1-12 or VC-12s 1-63.
- VCTRUNK 9-VCTRUNK 16 can be bound with VC-3s 13-24 or VC-12s 64-126.
- A VCTRUNK cannot be bound with VC-12s numbered 1-63 and VC-3s numbered 10-12 at the same time. In addition, a VCTRUNK cannot be bound with VC-12s numbered 64-126 and VC-3s numbered 22-24 at the same time.
- VC-4s numbered 4 and 8 support the binding of VC-3 and VC-12 paths. The other VC-4s support the binding of VC-3 paths only.
- In the case of the configuration of cross-connection, VC-12s numbered 1-63 should be configured into the fourth VC-4, and VC-12s numbered 64-126 should be configured into the eighth VC-4.
|
| Protection schemes | TPS | Not supported |
| LCAS | Supports LCAS, which dynamically increases or decreases the bandwidth and protects the bandwidth in compliance with ITU-T G.7042. |
| LPT | Supports P2P LPT, which comply with ITU-T G.7042. |
| LAG | Not supported |
| Clock synchronization | Synchronous Ethernet | Not supported |
| IEEE 1588v2 | Not supported |
| Maintenance features | ETH OAM | N1EFT8 boards do not support the ETH OAM function. N2EFT8 boards support CC, LB, LT. These functions comply with IEEE 802.1ag. N2EFT8 boards support OAM auto-discovery, link performance detection, fault detection, remote loopback and selfloop test. These functions comply with IEEE 802.3ah. |
| Test Frame | Supports test frames in GFP bearer mode. |
| Response to ping | Not supported |
| Port Mirroring | Not supported |
| Loopback capability | PHY layer at Ethernet ports | Supports inloops. |
| MAC layer at Ethernet ports | Supports inloops. |
| VC-4 level | Not supported |
| VC-3 level | Supports inloops and outloops. |
| VC-12 level | Not supported |
| RMON | Supports Ethernet performance monitoring at the port level. |
| Warm resets | Supported (Warm resets do not affect services.) |
| Cold resets | Supported |
| Alarms and performance events | Reports various alarms and performance events, which facilitates the management and maintenance of the equipment. |
| QoS | Not supported |
| Hub/Spoke | Not supported |
| Traffic control | Supports the FE port-based traffic control function that complies with IEEE 802.3x. NOTE: Only EPL services support port-based traffic control. |
DHL
Fedex
By Sea
Notice:
Deliver to port:
Deliver to door:
100% Low Price Guarantee:
100% Quality Assurance:
Free Technical Support:
100% Money Back Guarantee:
Flexible Secure Payment & Shipment: